KCCITM-K C C Institute of Technology and Management

KCCITM-K C C Institute of Technology and Management

ABOUT

Established in 2008, KCC Institute of Technology and Management is a premier engineering and management college in Greater Noida that offers various academic degrees to the students. The Institute is approved by AICTE and is affiliated to UPTU. The campus has a stellar infrastructure, modern facilities for sports and recreational centre and the college majors in MBA and PGDM degrees.

Key Highlights

  • 40 acre campus
  • Faculty with 10 years of experience
  • Stellar Campus Infrasructure

Contact Details

Admission Cell

Contact PersonK C C Institute of Technology and Management
Contact number092100 65555
Email@
Official Websitehttps://www.kccitm.edu.in/

Placement Cell

Contact PersonK C C Institute of Technology and Management
Contact number092100 65555
Email@

Photos

Key Ratio

  • Number of student60
  • Teacher (Full Time)15
  • Teacher (Part Time)3
  • Area Per Student40
  • Hostel FacilityNo

Address

2b
2C
Knowledge Park III
Greater Noida
Uttar Pradesh 201306
Greater Noida
201306

Popularity

K C C Institute of Technology and Management's profile had been viewed from 7 locations across the globe, Most recently from New Delhi.

  • IPRSRG
  • 1 User Views in last 30 days

COLLEGE SUMMARY

Kcc Institute Of Technology And Management Isunaided - Private Institute Located At Greater Noida Inuttar Pradesh . The Address Of The Institute Is 2B & 2C, Knowledge Park Iii, Greater Noida Gautambudh Nagar ,Gautam Buddha Nagar , Pincode201306 . It Operates Under The Parent Organization Deepak Gupta Education Trust . The Institute Started Its First Course In 2009. Kcc Institute Of Technology And Management Is Open For Both Men And Women. Kcc Institute Of Technology And Management Is Open For All Sections Of Society. The Head Of The Insititute Is Director K P Yadav , Having A Teaching Experience Of 20 Years And Research Experience Of 6 Years. Contact Details: Website: Www.Kccitm.Edu.In Email: Kccdeepak(at)Yahoo.Co.In Landline No: 11 - 32016944

Course Details:

 

COMPUTER SCIENCE & ENGINEERING ENGINEERING AND TECHNOLOGY POST GRADUATE  
Affiliating Body: Dr. A.P.J. Abdul Kalam Technical University, Uttar Pradesh, Lucknow Year Started: 2012
Shift: 1st Shift Accreditation Status: ELIGIBLE-NOT APPLIED
Course Type: FULL TIME Course Mode: Regular
NRI Approved : NA PIO Approved: NA
Any Foreign Collaboration : NA Name of Foreign University: -
Annual Fees (15-16): ? 80000 Course Duration: 2 years
Approved Intake (15-16): 18 Approved Intake (16-17): 18

 

ELECTRONICS AND COMMUNICATIONS ENGINEERING ENGINEERING AND TECHNOLOGY POST GRADUATE  
Affiliating Body: Dr. A.P.J. Abdul Kalam Technical University, Uttar Pradesh, Lucknow Year Started: 2014
Shift: 1st Shift Accreditation Status: ELIGIBLE-NOT APPLIED
Course Type: FULL TIME Course Mode: Regular
NRI Approved : NA PIO Approved: NA
Any Foreign Collaboration : NA Name of Foreign University: -
Annual Fees (15-16): ? 80000 Course Duration: 2 years
Approved Intake (15-16): 18 Approved Intake (16-17): 18

 

MECHANICAL ENGINEERING ENGINEERING AND TECHNOLOGY POST GRADUATE  
Affiliating Body: Dr. A.P.J. Abdul Kalam Technical University, Uttar Pradesh, Lucknow Year Started: 2012
Shift: 1st Shift Accreditation Status: ELIGIBLE-NOT APPLIED
Course Type: FULL TIME Course Mode: Regular
NRI Approved : NA PIO Approved: NA
Any Foreign Collaboration : NA Name of Foreign University: -
Annual Fees (15-16): ? 80000 Course Duration: 2 years
Approved Intake (15-16): 18 Approved Intake (16-17): 18

 

CIVIL ENGINEERING ENGINEERING AND TECHNOLOGY UNDER GRADUATE  
Affiliating Body: Dr. A.P.J. Abdul Kalam Technical University, Uttar Pradesh, Lucknow Year Started: 2011
Shift: 1st Shift Accreditation Status: ELIGIBLE-NOT APPLIED
Course Type: FULL TIME Course Mode: Regular
NRI Approved : NA PIO Approved: NA
Any Foreign Collaboration : NA Name of Foreign University: -
Annual Fees (15-16): ? 80000 Course Duration: 4 years
Approved Intake (15-16): 180 Approved Intake (16-17): 180

 

COMPUTER SCIENCE & ENGINEERING ENGINEERING AND TECHNOLOGY UNDER GRADUATE  
Affiliating Body: Dr. A.P.J. Abdul Kalam Technical University, Uttar Pradesh, Lucknow Year Started: 2012
Shift: 1st Shift Accreditation Status: ELIGIBLE-NOT APPLIED
Course Type: FULL TIME Course Mode: Regular
NRI Approved : NA PIO Approved: NA
Any Foreign Collaboration : NA Name of Foreign University: -
Annual Fees (15-16): ? 80000 Course Duration: 4 years
Approved Intake (15-16): 120 Approved Intake (16-17): 120

 

ELECTRICAL ENGINEERING ENGINEERING AND TECHNOLOGY UNDER GRADUATE  
Affiliating Body: Dr. A.P.J. Abdul Kalam Technical University, Uttar Pradesh, Lucknow Year Started: 2014
Shift: 1st Shift Accreditation Status: ELIGIBLE-NOT APPLIED
Course Type: FULL TIME Course Mode: Regular
NRI Approved : NA PIO Approved: NA
Any Foreign Collaboration : NA Name of Foreign University: -
Annual Fees (15-16): ? 80000 Course Duration: 4 years
Approved Intake (15-16): 60 Approved Intake (16-17): 60

 

ELECTRONICS AND COMMUNICATIONS ENGINEERING ENGINEERING AND TECHNOLOGY UNDER GRADUATE  
Affiliating Body: Dr. A.P.J. Abdul Kalam Technical University, Uttar Pradesh, Lucknow Year Started: 2009
Shift: 1st Shift Accreditation Status: ELIGIBLE-NOT APPLIED
Course Type: FULL TIME Course Mode: Regular
NRI Approved : NA PIO Approved: NA
Any Foreign Collaboration : NA Name of Foreign University: -
Annual Fees (15-16): ? 80000 Course Duration: 4 years
Approved Intake (15-16): 120 Approved Intake (16-17): 120

 

INFORMATION TECHNOLOGY ENGINEERING AND TECHNOLOGY UNDER GRADUATE  
Affiliating Body: Dr. A.P.J. Abdul Kalam Technical University, Uttar Pradesh, Lucknow Year Started: 2009
Shift: 1st Shift Accreditation Status: ELIGIBLE-NOT APPLIED
Course Type: FULL TIME Course Mode: Regular
NRI Approved : NA PIO Approved: NA
Any Foreign Collaboration : NA Name of Foreign University: -
Annual Fees (15-16): ? 80000 Course Duration: 4 years
Approved Intake (15-16): 60 Approved Intake (16-17): 60

 

MECHANICAL ENGINEERING ENGINEERING AND TECHNOLOGY UNDER GRADUATE  
Affiliating Body: Dr. A.P.J. Abdul Kalam Technical University, Uttar Pradesh, Lucknow Year Started: 2009
Shift: 1st Shift Accreditation Status: ELIGIBLE-NOT APPLIED
Course Type: FULL TIME Course Mode: Regular
NRI Approved : NA PIO Approved: NA
Any Foreign Collaboration : NA Name of Foreign University: -
Annual Fees (15-16): ? 80000 Course Duration: 4 years
Approved Intake (15-16): 240 Approved Intake (16-17): 240

 

MECHANICAL ENGINEERING ENGINEERING AND TECHNOLOGY UNDER GRADUATE  
Affiliating Body: Dr. A.P.J. Abdul Kalam Technical University, Uttar Pradesh, Lucknow Year Started: 2012
Shift: 2nd Shift Accreditation Status: ELIGIBLE-NOT APPLIED
Course Type: FULL TIME Course Mode: Regular
NRI Approved : NA PIO Approved: NA
Any Foreign Collaboration : NA Name of Foreign University: -
Annual Fees (15-16): ? 80000 Course Duration: 4 years
Approved Intake (15-16): 60 Approved Intake (16-17): 60
 

Lab Details:

Sr No. Lab Name Programme Course Level of Course Major Equipments
1 ALGORITHMS LAB ENGINEERING AND TECHNOLOGY COMPUTER SCIENCE & ENGINEERING UNDER GRADUATE Turbo C++
2 ARTIFICIAL INTELLIGENCE LAB ENGINEERING AND TECHNOLOGY COMPUTER SCIENCE & ENGINEERING UNDER GRADUATE LISP
3 BUILDING MATERIALS LAB ENGINEERING AND TECHNOLOGY CIVIL ENGINEERING UNDER GRADUATE BALIN AIR PERMEABILITY APPARATUS, LE-CHATELIER APPARATUS, BRIQUETTE TESTING MACHINE
4 BUILDING PLANNING & DRAWING ENGINEERING AND TECHNOLOGY CIVIL ENGINEERING UNDER GRADUATE BRICKLAYER'S SCAFFOLDING, CARPENTRY JOINTS, CENTERING OF ARCH
5 CAD LAB-1 ENGINEERING AND TECHNOLOGY CIVIL ENGINEERING UNDER GRADUATE ANSYS, ADINA, NISA, SOFTWARE LIKE STAAD PRO, SAP, ETAB, STRAP
6 CAD LAB-2 ENGINEERING AND TECHNOLOGY CIVIL ENGINEERING UNDER GRADUATE WATER CARD, SEWER CAD , WATER GEM, SEWER GEM, SURVEYING SOFTWARE
7 CAD OF ELECTRONICS LAB ENGINEERING AND TECHNOLOGY ELECTRONICS AND COMMUNICATIONS ENGINEERING UNDER GRADUATE Computer & Software,
8 CAD/CAM LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE CNC TRAINER LATHE CLT-100 WITH PC, CNC MILL TRAINER WITH PC WITH MODEL MT 250
9 CHEMISTRY ENGINEERING AND TECHNOLOGY FIRST YEAR/OTHER UNDER GRADUATE SPECTRO PHOTO METER, CONDUCTIVITY METER, OSTWALD VISCOMETER, PH METER, COLORIMETER, OVEN, BALANCE, W
10 COMMUNICATION LAB-I ENGINEERING AND TECHNOLOGY ELECTRONICS AND COMMUNICATIONS ENGINEERING UNDER GRADUATE To Plot the radiation pattern of a Dipole. Yagi-uda and calculate its beam width.
11 COMMUNICATION LAB-II ENGINEERING AND TECHNOLOGY ELECTRONICS AND COMMUNICATIONS ENGINEERING UNDER GRADUATE Study of pulse code Modulation and demodulation, Manchester Coding and decoding
12 COMPILER LAB ENGINEERING AND TECHNOLOGY COMPUTER SCIENCE & ENGINEERING UNDER GRADUATE Turbo C++
13 COMPUTER AIDED ENGINEERING GRAPHICS LAB ENGINEERING AND TECHNOLOGY FIRST YEAR/OTHER UNDER GRADUATE DRAWING BOARD, STAND, STOOL & DISPLAY CHART
14 COMPUTER GRAPHICS LAB ENGINEERING AND TECHNOLOGY COMPUTER SCIENCE & ENGINEERING UNDER GRADUATE Turbo C++
15 COMPUTER NETWORK LAB ENGINEERING AND TECHNOLOGY COMPUTER SCIENCE & ENGINEERING UNDER GRADUATE Turbo C++, Unix
16 COMPUTER ORGAINZATION ENGINEERING AND TECHNOLOGY COMPUTER SCIENCE & ENGINEERING UNDER GRADUATE PCB BOARD, REGISTER, IC, WIRE
17 CONTROL SYSTEMS LAB ENGINEERING AND TECHNOLOGY ELECTRONICS AND COMMUNICATIONS ENGINEERING UNDER GRADUATE A.C. Position Control System, Study of a ac motor angular position control system
18 CRYPTOGRAPHY & NETWORK SECURITY LAB ENGINEERING AND TECHNOLOGY INFORMATION TECHNOLOGY UNDER GRADUATE NS2
19 DATA STRUCTURES LAB ENGINEERING AND TECHNOLOGY COMPUTER SCIENCE & ENGINEERING UNDER GRADUATE TURBO C++
20 DBMS LAB ENGINEERING AND TECHNOLOGY COMPUTER SCIENCE & ENGINEERING UNDER GRADUATE ORACLE 9i
21 DIGITAL ELECTRONICS LAB-I ENGINEERING AND TECHNOLOGY ELECTRONICS AND COMMUNICATIONS ENGINEERING UNDER GRADUATE Experimental kit to study 4-Bit Synchronous counter DS-36
22 DIGITAL ELECTRONICS LAB-II ENGINEERING AND TECHNOLOGY ELECTRONICS AND COMMUNICATIONS ENGINEERING UNDER GRADUATE TTL Transfer characteristics & TTL IC Gates Trainer,
23 DIGITAL IMAGE PROCESSING LAB ENGINEERING AND TECHNOLOGY COMPUTER SCIENCE & ENGINEERING UNDER GRADUATE MAT LAB
24 DISTRIBUTED SYSTEM LAB ENGINEERING AND TECHNOLOGY COMPUTER SCIENCE & ENGINEERING UNDER GRADUATE LINUX
25 DSP LAB ENGINEERING AND TECHNOLOGY ELECTRONICS AND COMMUNICATIONS ENGINEERING UNDER GRADUATE DSP Development System based on Texas Instruments Processor TMS320C52,
26 ELECTRICAL LAB ENGINEERING AND TECHNOLOGY FIRST YEAR/OTHER UNDER GRADUATE KRICHHOFF LAW, SUPER POSITION, THEVENIN, NORTHERN, WATTMETER , POLARITY, SHUNT MOTOR & INDUCTION MOT
27 ELECTRICAL MACHINES & AUTOMATIC CONTROL LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE AC Servo Motor Speed Torque Characteristics, DC Motor Position Control System
28 ELECTRONICS CIRCUIT DESIGN LAB ENGINEERING AND TECHNOLOGY ELECTRONICS AND COMMUNICATIONS ENGINEERING UNDER GRADUATE CRO, DSO, P-SPICE , MULTI SIM, 8051 IC
29 ELECTRONICS ENGINEERING LAB I ENGINEERING AND TECHNOLOGY ELECTRONICS AND COMMUNICATIONS ENGINEERING UNDER GRADUATE Experimental kit to study charactristics of SCR
30 ELECTRONICS ENGINEERING LAB-II ENGINEERING AND TECHNOLOGY ELECTRONICS AND COMMUNICATIONS ENGINEERING UNDER GRADUATE Bipolar Transistor Design of single RC coupled amplifier,
31 ENGINEERING MECHANICS LAB ENGINEERING AND TECHNOLOGY FIRST YEAR/OTHER UNDER GRADUATE UTM, IMPACT, HARDNESS TESTING, FLYWHEEL, FRICTION, TORSION, BELT PULLEY,
32 ENGINEERING PHYSICS LAB ENGINEERING AND TECHNOLOGY FIRST YEAR/OTHER UNDER GRADUATE NEWTONS RINGS, POLARIMETER, FRESNEL BIPRISM, CAREY FOSTER BRIDGE, MAGNATIC FIELD,
33 ENVIRONMENTOL ENGINEERING LAB-I ENGINEERING AND TECHNOLOGY CIVIL ENGINEERING UNDER GRADUATE BOD INCUBATOR, COD OF WASTE SAMPLE APPARATUS, DIGITAL TURBIDITY METER
34 FLUID MACHINERY LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE Pelton Wheel Turbine Test Rig-5Hp, Francis Turbine Test Rig-5Hp
35 FLUID MECHANICS LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE Impact of Jet Apparatus, Reynolds Apparatus,
36 GEOINFORMATICS LAB ENGINEERING AND TECHNOLOGY CIVIL ENGINEERING UNDER GRADUATE ELECTRONIC TOTAL STATION, MIRROR STEREOSCOPE, PARALLAX BAR
37 GEOTECHANICAL ENGINEERING LAB ENGINEERING AND TECHNOLOGY CIVIL ENGINEERING UNDER GRADUATE STND DYNAMIC CONE PENETRATION TEST,RELATIVE DENSITY
38 HEAT & MASS TRANSTER ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE Parallel Flow and Counter Flow Heat Exchanger, heat transfer through natural convection with table
39 HYDRAULICS & HYDRAULICS MACHINE LAB ENGINEERING AND TECHNOLOGY CIVIL ENGINEERING UNDER GRADUATE CENTRIFUGAL PUMP TEST RIG, FRANCIS TURBINE TEST RIG, PELTON WHEEL TURBINE TEST RIG
40 I C ENGINE & AUTOMOBILE LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE SINGLE CYLINDER FOUR STROKE PETROL ENGINE TEST RIG, STEERING SYSTEM, POWER SYSTEM,MODEL OF HYDRAULIC
41 INTEGRATED CIRCUITS LAB ENGINEERING AND TECHNOLOGY ELECTRONICS AND COMMUNICATIONS ENGINEERING UNDER GRADUATE Op-Amp as Log and antilog amplifiers, Voltage to current and current to voltage converter,
42 LOGIC DESIGN LAB ENGINEERING AND TECHNOLOGY COMPUTER SCIENCE & ENGINEERING UNDER GRADUATE REGISTER, CRT, BOARD,
43 MACHINE DESIGN-I LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE Drawing Board & Stool
44 MACHINE DESIGN-II LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE Drawing Board & stool, Software
45 MACHINE DRAWING-I ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE Model of Keys , Model of Cotter Joint, Model of Knuckle Joint
46 MACHINE DRAWING-II ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE Model of Cross Head, Model of Flat Belt Pulley
47 MANUFACTURING SCIENCE-I LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE Design of pattern for a desired casting , Making a mould (with core) & casting,
48 MANUFACTURING SCIENCE-II ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE Engine Lathe Machine, Milling Machine, Surface Grinder,
49 MATERIAL SCIENCE & TESTING LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE Double Disc Polishing Machine, Heat Treatment Furnace
50 MEASUREMENT & METROLOGY LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE Mocro Meter, Tachometer, Flow measurement experiment
51 MEASUREMENT LAB ENGINEERING AND TECHNOLOGY ELECTRONICS AND COMMUNICATIONS ENGINEERING UNDER GRADUATE Measurement of low resistance kelvin's double bridge
52 MICROPROCESSOR LAB ENGINEERING AND TECHNOLOGY COMPUTER SCIENCE & ENGINEERING UNDER GRADUATE MICROPROCESSOR 8085 KIT
53 MICROPROCESSORS LAB ENGINEERING AND TECHNOLOGY ELECTRONICS AND COMMUNICATIONS ENGINEERING UNDER GRADUATE 8086 Microprocessor trainer kit with LCD display (VMC-5609P)
54 MICROWAVE & FIBER OPTIC LAB ENGINEERING AND TECHNOLOGY ELECTRONICS & COMMUNICATION ENGG UNDER GRADUATE SOLID STATE KLYSTRON POWER SUPPLY, VSWR METER, PARABOLIC DISC (WITH FEED) 8' DIA
55 MINI PROJECT USING WEB TECHNOLOGY-I ENGINEERING AND TECHNOLOGY INFORMATION TECHNOLOGY UNDER GRADUATE Oracle 9i, VB6, JDK,
56 NUMERICAL TECHNIQUES ENGINEERING AND TECHNOLOGY COMPUTER SCIENCE & ENGINEERING UNDER GRADUATE TURBO C++, UNIX
57 OBJECT ORIENTED TECHNIQUES LAB ENGINEERING AND TECHNOLOGY COMPUTER SCIENCE & ENGINEERING UNDER GRADUATE Java, JDK, Java Been, Apache server

Faculty Details:
Sr. No Name Gender Email Designation Level Specialization Date of Joining Appointment Type
1 ABHA SINGH Female abha_singh(at)live.com ASST PROFESSOR UG COMPUTER SCIENCE 01-Aug-12 Regular
2 ABHAY PRATAP SINGH Male apsingh007(at)gmail.com ASST PROFESSOR UG ELECTRONICS 07-Aug-12 Regular
3 ABHISHEK TYAGI Male tyagiabhishek007(at)gmail.com ASST PROFESSOR UG ENGINEERING MECHANICS 02-Sep-12 Regular
4 ABHISHEK KUMAR SINGH Male abhshek.532(at)gmail.com ASST PROFESSOR UG COMPUTER SCIENCE 01-Aug-12 Regular
5 ADNAN SAEED Male iadnansaeed(at)yahoo.com ASST PROFESSOR UG THERMAL SCIENCE 05-Feb-13 Regular
6 AJAY PRAKASH SINGH Male ajayprakashsingh(at)gmail.com ASST PROFESSOR UG ELECTRONICS & COMMUNICATION 01-Aug-12 Regular
7 AJIT KUMAR SINGH Male singh.ajit6676(at)gmail.com ASST PROFESSOR UG ELECTRONICS 01-Aug-12 Regular
8 AKASH KUMAR GUPTA Male akashgupta(at)gmail.com ASST PROFESSOR UG COMPUTER SCIENCE 01-Oct-12 Regular
9 AMRENDRA PRATAP SINGH Male amrendraec(at)gmail.com ASST PROFESSOR UG ELECTRONICS 09-Sep-12 Regular
10 ANKIT JAYANT Male ankitjayant(at)yahoo.com ASST PROFESSOR UG ELECTRONICS 01-Aug-12 Regular
11 ANMOL MAHESHWARI Male anmol1091(at)gmail.com ASST PROFESSOR UG ELECTRONICS 10-Oct-12 Regular
12 ARADHANA SRIVASTAV Female engaradhana(at)gmail.com ASST PROFESSOR UG INFORMATION TECHNOLOGY 01-Aug-12 Regular
13 DANISH CHAUDHARY Male danish123(at)gmail.com ASST PROFESSOR UG ELECTRONICS 15-Aug-12 Regular
14 DEEPAK KUMAR SAROJ Male deepak.saroj(at)gmail.com ASST PROFESSOR UG ELECTRONICS 01-Aug-12 Regular
15 DHANANJAY SINGH Male dhananjay4587(at)gmail.com ASST PROFESSOR UG TELECOMMUNICATION 01-Aug-12 Regular
16 DHARMENDRA KUMAR JHA Male aki.iita(at)yahoo.com ASST PROFESSOR UG ELECTRONICS 28-Jan-13 Regular
17 DIVYA BHATIA Female divyabhatia20(at)gmail.com ASST PROFESSOR UG INFORMATINO TECHNOLOGY 07-Feb-13 Regular
18 DOLLY KUMARI Female doll_d44(at)yahoo.com ASST PROFESSOR UG COMPUTER SCIENCE 03-Aug-12 Regular
19 DURGESH KUMAR Male er.rdurgesh(at)gmail.com ASST PROFESSOR UG ENVIRONMENTAL CIVIL 31-Aug-12 Regular
20 FEROZA HAQUE Female feroza.haque(at)gmail.com ASST PROFESSOR UG COMPUTER SCIENCE 01-Aug-12 Regular
21 GAJENDRA SINGH Male gajendra_mech620(at)rediffmail.com ASST PROFESSOR UG ENGG. MECHANICS 01-Oct-12 Regular
22 GYANENDRA PRATAP SINGH Male sgagan87(at)gmail.com ASST PROFESSOR UG MECHANICAL ENGINEERING 28-Aug-12 Regular
23 HIMANK GUPTA Male himankgupta(at)gmail.com ASST PROFESSOR UG ELECTRONICS 01-Aug-12 Regular
24 KUNAL BHASKAR Male kbhaskar12(at)rediffmail.com ASST PROFESSOR UG COMPUTER SCIENCE 15-Sep-12 Regular
25 MADHU SHARMA Female contact2madhu(at)gmail.com ASST PROFESSOR UG MATHEMATICS 21-Aug-12 Regular
26 MALAY SHANKAR TRIPATHI Male malay131185(at)gmail.com ASST PROFESSOR UG ENGINEERING MECHANICS 19-Sep-12 Regular
27 MANJARI AGRAWAL Female manjari_frnd(at)yahoo.co.in ASST PROFESSOR UG NANO TECHNOLOGY 15-Aug-12 Regular
28 MAYANKA . Female mayank(at)gmail.com ASST PROFESSOR UG ELCTRONICS 01-Aug-12 Regular
29 MD IRFANUL HAQUE Male irfanforall(at)gmail.com ASST PROFESSOR UG CIVIL ENGINEERING 04-Feb-13 Regular
30 MOHIT SINGH Male mohitsingh(at)gmail.com ASST PROFESSOR UG ELECTRONICS 15-Oct-12 Regular
31 NEHA SHARMA Female neha.siet84(at)gmail.com ASSOCIATE PROFESSOR UG ELECTRONICS & COMMUNICATION 23-Aug-12 Regular
32 NITESH KUMAR Male nitesh.bitshilani(at)gmail.com ASSOCIATE PROFESSOR UG THERMAL & MANUFACTURING 31-Aug-12 Regular
33 OINDRILA CHAKRABORTY Male oin.chakraborty(at)yahoo.com ASST PROFESSOR UG MICRO ELECTRONICS 01-Aug-12 Regular
34 PARVEZ KHAN Male khan.civil2012(at)rediffmail.com ASST PROFESSOR UG CIVIL ENGINEERING 11-Oct-90 Regular
35 PAVAN PRAKASH GIRI Male pavan.giri1(at)gmail.com PROFESSOR UG ORGANIC CHEMISTRY 01-Aug-12 Regular
36 PAWAN KUMAR SINGH Male pawanyadav(at)gmail.com ASST PROFESSOR UG ELCTRONICS 12-Oct-12 Regular
37 PINKEY BHATI Female pinkeybhati.091(at)gmail.com ASST PROFESSOR UG INFORMATION TECHNOLOGY 01-Aug-12 Regular
38 POOJA JOLLY Female poojajolly2012(at)gmail.com ASST PROFESSOR UG DIGITAL ELECTRONICS 01-Aug-12 Regular
39 PRABHAT KUMAR TIWARI Male prabhattiwari(at)gmail.com ASST PROFESSOR UG SOFTWARE ENGINEERING 15-Sep-12 Regular
40 PRASHANT KUMAR Male prashantmaavi(at)gmail.com ASSOCIATE PROFESSOR UG ELECTRONICS 01-Aug-12 Regular
41 R C SHASHANI Female rcshasani(at)gmail.com ASST PROFESSOR UG MECHANICS ENGG 08-Sep-12 Regular
42 RAHIS KUMAR YADAV Male rkyeng2009(at)gmail.lcom ASST PROFESSOR UG ELECTRONICS 18-Aug-12 Regular
43

Library Facilities :

Reading Hall Capacity: 155
Library Network: YES
No of Multimedia PCs: Y
Reprographic Availability: Y
Working Hours: 9:00 AM TO 7:00 PM
 

Library Books :

 
Sr No. Book Details
1
Programme: ENGINEERING AND TECHNOLOGY
No of Titles: 3591
No of Volumes: 27645
No of National Journals: 60
No of Inter-National Journals: 40

Anti-Ragging Details:

Name of Committee Member: Dr. R K Porwal
Committee Type: Anti-Ragging Committee
Profession: Professor
Associated With: 3 Year
Date of Appointment: 07-Aug-13
 
Name of Committee Member: Mr. ATUL SINGH DURGBANS
Committee Type: Anti-Ragging Committee
Profession: Asst Professor
Associated With: 2 Year
Date of Appointment: 01-Jan-14
 
Name of Committee Member: MR. RAKESH KUMAR YADAV
Committee Type: Anti-Ragging Committee
Profession: Associate Professor
Associated With: 1.6 Year
Date of Appointment: 18-Jan-14
 
Name of Committee Member: Mr. R M Pujahari
Committee Type: Anti-Ragging Squad
Profession: Associate Professor
Associated With: 6 Month
Date of Appointment: 13-Aug-15
 
Name of Committee Member: Dr. A R Khan
Committee Type: Anti-Ragging Squad
Profession: Associate Professor
Associated With: 6 Year
Date of Appointment: 09-Oct-10
 
Name of Committee Member: Dr. RIA NANDA
Committee Type: Anti-Ragging Squad
Profession: Asst. Professor
Associated With: 6 Month
Date of Appointment: 24-Aug-15
 

Student Count

Sr. No. Course Programme Level Shift First Year Student Count(15-16)
1 COMPUTER SCIENCE & ENGINEERING ENGINEERING AND TECHNOLOGY POST GRADUATE 1st Shift 119
2 ELECTRONICS AND COMMUNICATIONS ENGINEERING ENGINEERING AND TECHNOLOGY POST GRADUATE 1st Shift 1
3 MECHANICAL ENGINEERING ENGINEERING AND TECHNOLOGY POST GRADUATE 1st Shift 81
4 CIVIL ENGINEERING ENGINEERING AND TECHNOLOGY UNDER GRADUATE 1st Shift 91
5 COMPUTER SCIENCE & ENGINEERING ENGINEERING AND TECHNOLOGY UNDER GRADUATE 1st Shift 119
6 ELECTRICAL ENGINEERING ENGINEERING AND TECHNOLOGY UNDER GRADUATE 1st Shift 4
7 ELECTRONICS AND COMMUNICATIONS ENGINEERING ENGINEERING AND TECHNOLOGY UNDER GRADUATE 1st Shift 1
8 INFORMATION TECHNOLOGY ENGINEERING AND TECHNOLOGY UNDER GRADUATE 1st Shift 0
9 MECHANICAL ENGINEERING ENGINEERING AND TECHNOLOGY UNDER GRADUATE 1st Shift 81
10 MECHANICAL ENGINEERING ENGINEERING AND TECHNOLOGY UNDER GRADUATE 2nd Shift 81
Help Your College
  • Encourage employer
    Allow thousands of recruiters to make informed decision to visit your campus.
    Encourage employer
  • Aid admission
    Let admission seekers know your college and its students to like and join.
    Aid admission
Info. update by students of the respective college only.