GCE-Government College of Engineering Karad
GCE-Government College of Engineering Karad

GCE-Government College of Engineering Karad

ABOUT

Government Engineering College Karad was established in 1960 as a technology based courses offering institute in Karad, Maharashtra. The college is approved by AICTE (Ministry of HRD, Govt. of India) and affiliated to Shivaji University, Maharashtra.The College provides UG and PG courses.The institute has set the following objectives to provide technical education of highest standards to all classes of society including economically and socially backward sections of society.

Key Highlights

  • World class facilities
  • Best quality of higher education
  • Training and Placement

Contact Details

Admission Cell

Contact PersonGovernment College of Engineering Karad
Contact number(02164) 272415
Emailprincipal@gcekarad.ac.in
Official Websitehttp://gcekarad.ac.in

Placement Cell

Contact PersonPlacement Cell
Contact number(02164) 272415
Emailtpo@gcekarad.ac.in

Photos

Address

Maharashtra(India)
Satara
415124

Popularity

Government College of Engineering Karad's profile had been viewed from 16 locations across the globe, Most recently from Cumbum.

  • Dnyana Murmure
  • Umesh Tukaram Patil
  • Ashok D Khandekar
  • 3 User Views in last 30 days

COLLEGE SUMMARY

Government College Of Engineering, Karad Isgovernment Institute Located At Karad Inmaharashtra . The Address Of The Institute Is Vidyanagar, Karad-415124 Dist: Satara, Maharashtra ,Satara , Pincode415124 . It Operates Under The Parent Organization Government College Of Engineering, Karad . The Institute Started Its First Course In 1960. Government College Of Engineering, Karad Is Open For Both Men And Women. Government College Of Engineering, Karad Is Open For All Sections Of Society. The Head Of The Insititute Is Principal Prakash Khodke , Having A Teaching Experience Of 32 Years And Research Experience Of 25 Years. Contact Details: Website: Www.Gcekarad.Ac.In Email: Principal@Gcekarad.Ac.In Landline No: 2164 - 272415
" "

Course Details:

  •  

    CONSTRUCTION MANAGEMENT ENGINEERING AND TECHNOLOGY POST GRADUATE  
    Affiliating Body: Shivaji University, Kolhapur Year Started: 1967
    Shift: 1st Shift Accreditation Status: APPLIED PENDING
    Course Type: FULL TIME Course Mode: Regular
    NRI Approved : NA PIO Approved: NA
    Any Foreign Collaboration : NA Name of Foreign University: -
    Annual Fees (15-16): ? 64253 Course Duration: 2 years
    Approved Intake (15-16): 25 Approved Intake (16-17): 25
  •  

    HEAT POWER ENGINEERING ENGINEERING AND TECHNOLOGY POST GRADUATE  
    Affiliating Body: Shivaji University, Kolhapur Year Started: 1967
    Shift: 1st Shift Accreditation Status: APPLIED PENDING
    Course Type: FULL TIME Course Mode: Regular
    NRI Approved : NA PIO Approved: NA
    Any Foreign Collaboration : NA Name of Foreign University: -
    Annual Fees (15-16): ? 64253 Course Duration: 2 years
    Approved Intake (15-16): 25 Approved Intake (16-17): 25
  •  

    POWER SYSTEMS ENGINEERING AND TECHNOLOGY POST GRADUATE  
    Affiliating Body: Shivaji University, Kolhapur Year Started: 1967
    Shift: 1st Shift Accreditation Status: APPLIED PENDING
    Course Type: FULL TIME Course Mode: Regular
    NRI Approved : NA PIO Approved: NA
    Any Foreign Collaboration : NA Name of Foreign University: -
    Annual Fees (15-16): ? 64253 Course Duration: 2 years
    Approved Intake (15-16): 25 Approved Intake (16-17): 25
  •  

    PRODUCTION ENGINEERING ENGINEERING AND TECHNOLOGY POST GRADUATE  
    Affiliating Body: Shivaji University, Kolhapur Year Started: 1967
    Shift: 1st Shift Accreditation Status: APPLIED PENDING
    Course Type: FULL TIME Course Mode: Regular
    NRI Approved : NA PIO Approved: NA
    Any Foreign Collaboration : NA Name of Foreign University: -
    Annual Fees (15-16): ? 64253 Course Duration: 2 years
    Approved Intake (15-16): 25 Approved Intake (16-17): 25
  •  

    STRUCTURAL ENGINEERING ENGINEERING AND TECHNOLOGY POST GRADUATE  
    Affiliating Body: Shivaji University, Kolhapur Year Started: 1967
    Shift: 1st Shift Accreditation Status: APPLIED PENDING
    Course Type: FULL TIME Course Mode: Regular
    NRI Approved : NA PIO Approved: NA
    Any Foreign Collaboration : NA Name of Foreign University: -
    Annual Fees (15-16): ? 64253 Course Duration: 2 years
    Approved Intake (15-16): 25 Approved Intake (16-17): 25
  •  

    CIVIL ENGINEERING ENGINEERING AND TECHNOLOGY UNDER GRADUATE  
    Affiliating Body: Shivaji University, Kolhapur Year Started: 1960
    Shift: 1st Shift Accreditation Status: ACCREDITED
    Course Type: FULL TIME Course Mode: Regular
    NRI Approved : NA PIO Approved: NA
    Any Foreign Collaboration : NA Name of Foreign University: -
    Annual Fees (15-16): ? 64673 Course Duration: 4 years
    Approved Intake (15-16): 60 Approved Intake (16-17): 60
  •  

    ELECTRICAL ENGINEERING ENGINEERING AND TECHNOLOGY UNDER GRADUATE  
    Affiliating Body: Shivaji University, Kolhapur Year Started: 1960
    Shift: 1st Shift Accreditation Status: ACCREDITED
    Course Type: FULL TIME Course Mode: Regular
    NRI Approved : NA PIO Approved: NA
    Any Foreign Collaboration : NA Name of Foreign University: -
    Annual Fees (15-16): ? 64673 Course Duration: 4 years
    Approved Intake (15-16): 60 Approved Intake (16-17): 60
  •  

    ELECTRONICS AND TELECOMMUNICATIONS ENGINEERING ENGINEERING AND TECHNOLOGY UNDER GRADUATE  
    Affiliating Body: Shivaji University, Kolhapur Year Started: 2007
    Shift: 1st Shift Accreditation Status: NOT ACCREDITED
    Course Type: FULL TIME Course Mode: Regular
    NRI Approved : NA PIO Approved: NA
    Any Foreign Collaboration : NA Name of Foreign University: -
    Annual Fees (15-16): ? 64673 Course Duration: 4 years
    Approved Intake (15-16): 60 Approved Intake (16-17): 60
  •  

    INFORMATION TECHNOLOGY ENGINEERING AND TECHNOLOGY UNDER GRADUATE  
    Affiliating Body: Shivaji University, Kolhapur Year Started: 2002
    Shift: 1st Shift Accreditation Status: ACCREDITED
    Course Type: FULL TIME Course Mode: Regular
    NRI Approved : NA PIO Approved: NA
    Any Foreign Collaboration : NA Name of Foreign University: -
    Annual Fees (15-16): ? 64673 Course Duration: 4 years
    Approved Intake (15-16): 60 Approved Intake (16-17): 60
  •  

    MECHANICAL ENGINEERING ENGINEERING AND TECHNOLOGY UNDER GRADUATE  
    Affiliating Body: Shivaji University, Kolhapur Year Started: 1960
    Shift: 1st Shift Accreditation Status: ACCREDITED
    Course Type: FULL TIME Course Mode: Regular
    NRI Approved : NA PIO Approved: NA
    Any Foreign Collaboration : NA Name of Foreign University: -
    Annual Fees (15-16): ? 64673 Course Duration: 4 years
    Approved Intake (15-16): 60 Approved Intake (16-17): 60

    Lab Details:
    Sr No. Lab Name Programme Course Level of Course Major Equipments
    1 ANALOG AND DIGITAL COMMUNICATION LAB ENGINEERING AND TECHNOLOGY ELECTRONICS AND TELECOMMUNICATIONS ENGINEERING UNDER GRADUATE SPECTRUM ANALYSER 3GHz
    2 APPLIED MECHANICS ENGINEERING AND TECHNOLOGY CIVIL ENGINEERING UNDER GRADUATE STRESS FREZING OVEN JIB CRANE BEAM APPARATUS
    3 BASIC ELECTRONICS LAB ENGINEERING AND TECHNOLOGY ELECTRONICS AND TELECOMMUNICATIONS ENGINEERING UNDER GRADUATE OrCAD Electronics Design Automation Software Tool
    4 CAD/CAM LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE 2-SIM SOFTWARE, IDEAS, PRE-e, CATIA COMMERISIAL SOFTWARE
    5 CHEMISTRY LAB ENGINEERING AND TECHNOLOGY FIRST YEAR/OTHER UNDER GRADUATE ph METER/ ELECTRONIC BALANCE
    6 COMPUTER HARDWARE AND MICROPROCESSOR LAB ENGINEERING AND TECHNOLOGY INFORMATION TECHNOLOGY UNDER GRADUATE MICROPROCESSOR KITS, PIV COMPUTERS, SOFTWARE, PRINTER, SCANNER, UPS SWITCH
    7 COMPUTER LAB ENGINEERING AND TECHNOLOGY ELECTRICAL ENGINEERING UNDER GRADUATE PIV COMPUTER/PRINTERS
    8 COMPUTER LAB 1 ENGINEERING AND TECHNOLOGY CIVIL ENGINEERING UNDER GRADUATE AUTODESK EDUCATIONAL SET, COMPUTERS, PRINTER
    9 COMPUTER LAB 2 ENGINEERING AND TECHNOLOGY CIVIL ENGINEERING UNDER GRADUATE STAAD-PRO, NISA, STRUDS SOFTWARES
    10 COMPUTER LAB ENTC ENGINEERING AND TECHNOLOGY ELECTRONICS AND TELECOMMUNICATIONS ENGINEERING UNDER GRADUATE MATLAB, SERVERS AND SOFTWARES,PROTEUS VIRTUAL SYSTEMS
    11 COMPUTER LAB MED ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE PIV COMPUTERS, C++, SOFTWARES, PRINTERS, DELL SERVER
    12 COMPUTER NETWORK LAB MCA MASTERS IN COMPUTER APPLICATIONS POST GRADUATE PIV COMPUTERS, SOFTWARES, PRINTERS, UPS
    13 CONCRETE LAB ENGINEERING AND TECHNOLOGY CIVIL ENGINEERING UNDER GRADUATE ELECTRONIC UNIVERSAL TESTING MACHINE, CONCRETE MIXER, CORE CUTTER, ULTRASONIC TESTER
    14 CONTROL LAB ENGINEERING AND TECHNOLOGY ELECTRICAL ENGINEERING UNDER GRADUATE LAB MEASURE EQUIPMENTS, 20MHz DUAL TRACE OSCILOSCOPE, INSTRUMENTATION TUTOR
    15 DESIGN DYNAMICS LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE BALANCING OF ROTATING MASSES, STEARING MECHANISM
    16 DESIGN LAB ENGINEERING AND TECHNOLOGY INFORMATION TECHNOLOGY UNDER GRADUATE PIV COMPUTERS, SERVER, SOFTWARE, PRINTER, SCANNER, UPS, OHP SWITCH
    17 DIGITAL ELECTRONICS LAB/COMPUTER GRAPHICS MCA MASTERS IN COMPUTER APPLICATIONS POST GRADUATE PIV COMPUTERS, SOFTWARES, PRINTERS
    18 ELECTRONICS MEASUREMENTS AND INSTRUMENTS LAB ENGINEERING AND TECHNOLOGY ELECTRONICS AND TELECOMMUNICATIONS ENGINEERING UNDER GRADUATE -
    19 ENVIRONMENTAL LAB ENGINEERING AND TECHNOLOGY CIVIL ENGINEERING UNDER GRADUATE ATOMIC ABSORPTION SPECTROPHOTOMETER, HYBRIDE GENERATOR
    20 FLUID MECHANICS LAB ENGINEERING AND TECHNOLOGY CIVIL ENGINEERING UNDER GRADUATE PELTON WHEEL TEST RING
    21 FLUID PUMPING MACHINE LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE PELTON, FRANCISE, KAPLAN TURBINE TEST RING
    22 FLUID SYSTEM AND MECHANICAL CONTROL LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE PNUMATIC CONTROL TRAINER, HYDRAULIC CONTROL TRAINER
    23 FUEL TESTING LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE ANYLINE POINT/FLASH AND FIRE POINT, CARBON RESIDUE MEASUREMENT
    24 GEOLOGY LAB ENGINEERING AND TECHNOLOGY CIVIL ENGINEERING UNDER GRADUATE AUTOMATIC PLAIN PAPER COPIER
    25 GEOTECHNICAL LAB ENGINEERING AND TECHNOLOGY CIVIL ENGINEERING UNDER GRADUATE PRESURE METER, LOAD FRAME 490 KN POLISHING AND LAPPING MACHINE, BRAZILIAN TEST APARATUS,DIRECT SHEAR
    26 GRAPHICS LAB ENGINEERING AND TECHNOLOGY INFORMATION TECHNOLOGY UNDER GRADUATE PIV COMPUTERS, SOFTWARES, PRINTERS, SCANNERS, OHP, Switch
    27 HEAT ENGINE LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE VARIABLE COMPRESSION ENGINE, TWIN CYLINDER DIESEL ENGINE TEST RING
    28 HEAT TRANSFER LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE EMISSIVITY MEASUREMENT, THERMAL CONDUCTIVITY MEASURE MENT
    29 IC ENGINE LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE MULTI CYLINDER PETROL ENGINE, SINGLE CYLINDER DIESEL & PETROL ENGINE, CENTRIFUGAL AIR COMPRESSOR,
    30 INTERNET/COMPUTER NETWORK LAB ENGINEERING AND TECHNOLOGY INFORMATION TECHNOLOGY UNDER GRADUATE PIV COMPUTERS, SOFTWARES, PRINTERS, SCANNERS, UPS, Switch
    31 IT LAB MCA MASTERS IN COMPUTER APPLICATIONS POST GRADUATE PIV COMPUTERS, SOFTWARES, PRINTERS
    32 MACHINE LAB 1 ENGINEERING AND TECHNOLOGY ELECTRICAL ENGINEERING UNDER GRADUATE DC MOTOR, ALTEMATOR SET, SLIP RING INDUCTION MOTOR
    33 MACHINE LAB 2 ENGINEERING AND TECHNOLOGY ELECTRICAL ENGINEERING UNDER GRADUATE DC MOTOR, ALTEMATOR SET, SLIP RING INDUCTION MOTOR
    34 MEASUREMENT LAB 2 ENGINEERING AND TECHNOLOGY ELECTRICAL ENGINEERING UNDER GRADUATE LINE IMPEDANCE STAB. N/W, 1GHz SPECTRUM ANALYSER
    35 MECHATRONICS AND ERGONOMICS LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE ROBOT, TLC CONTROL SYSTEM
    36 METALLURGY LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE SAND TESTING MACHINE, FURNACE, ANY LINE POINT, CORE HARDNESS TESTER, SAND MULLER ELCTROPERM
    37 MICROPROCESSOR AND MICROCONTROLLER LAB ENGINEERING AND TECHNOLOGY ELECTRONICS AND TELECOMMUNICATIONS ENGINEERING UNDER GRADUATE DIGITAL STORAGE OSCOLOSCOPES
    38 MICROPROCESSOR LAB ENGINEERING AND TECHNOLOGY ELECTRICAL ENGINEERING UNDER GRADUATE MICRO-TRAINER KIT, INTEL 8085, V-86-8086 TRAINER AT 4-6MHz, DSO
    39 MQC LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE FLOATING CARRAIAGE MICROMETER, OPTICAL PROTECTOR
    40 NON CONVENTIONAL ENERGY SOURCES LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE PYRANOMETER, HOT WIRE, ANIOMETER
    41 PHYSICS LAB ENGINEERING AND TECHNOLOGY FIRST YEAR/OTHER UNDER GRADUATE LASER KIT, HALL EFFECT, BUILT-IN SETUP, ADV.FIBEROPTIC KIT, ULTRASONIC INTERFERROMETER, DIELECTRIC
    42 POWER ELECTRONICS LAB ENGINEERING AND TECHNOLOGY ELECTRONICS AND TELECOMMUNICATIONS ENGINEERING UNDER GRADUATE DIGITAL STORAGE OSCOLOSCOPES
    43 POWER ELECTRONICS/ SEMICONDUCTOR LAB ENGINEERING AND TECHNOLOGY ELECTRICAL ENGINEERING UNDER GRADUATE EDDY CURRENT DYNAMOMETER, TEKTRONIX CRO
    44 PROJECT LAB ENGINEERING AND TECHNOLOGY ELECTRONICS AND TELECOMMUNICATIONS ENGINEERING UNDER GRADUATE -
    45 RAC LAB ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE MECHANICAL HEAT PUMP, MULTI EVAPORATOR VAPOUR COMPRESSION SYSTEM
    46 REMOTE SENSING AND GIS LAB ENGINEERING AND TECHNOLOGY CIVIL ENGINEERING UNDER GRADUATE ILWIS 3.3, CARTALINX, IDRIISI ANDES
    47 SDP LAB MCA MASTERS IN COMPUTER APPLICATIONS POST GRADUATE PIV COMPUTERS, SOFTWARES, PRINTERS
    48 SOFTWARE LAB ENGINEERING AND TECHNOLOGY INFORMATION TECHNOLOGY UNDER GRADUATE PIV COMPUTERS, SERVER, SOFTWARE, PRINTER, SCANNER, UPS, OHP SWITCH
    49 STRUCTURAL ENGINEERING/SOM LAB ENGINEERING AND TECHNOLOGY CIVIL ENGINEERING UNDER GRADUATE COMPRESION TESTING MACHINE, REBOUND HAMMER, PROFOMETER 5
    50 SURVEYING LAB ENGINEERING AND TECHNOLOGY CIVIL ENGINEERING UNDER GRADUATE ASTRONOMICAL TELESCOPE, DI4L DISTOMAT, TOTAL STATION
    51 SWITCHGEAR LAB ENGINEERING AND TECHNOLOGY ELECTRICAL ENGINEERING UNDER GRADUATE RELAY TESTING SET, AUTOMATIC AC VOLTAGE STABILIZER
    52 TRANSPORTATION LAB ENGINEERING AND TECHNOLOGY CIVIL ENGINEERING UNDER GRADUATE ASPHALT CONTENT NUCLEAR GUAGE, AUTOMATIC ROAD UNEVENNESS INDICATOR
    53 WORKSHOP ENGINEERING AND TECHNOLOGY MECHANICAL ENGINEERING UNDER GRADUATE LATHES, LCD PROJECTOR, ANSYS AND IDEAS SOFTWARE, FURNACE, BENCH VICE
    54 PROGRAMMING LAB ENGINEERING AND TECHNOLOGY INFORMATION TECHNOLOGY UNDER GRADUATE PIV COMPUTERS, SERVER, SOFTWARES
     

    Library Facilities :

    Reading Hall Capacity: 150
    Library Network: YES
    No of Multimedia PCs: Y
    Reprographic Availability: Y
    Working Hours: 08.00 AM TO 08.00 PM
     

    Library Books :

     
    Sr No. Book Details
    1
    Programme: ENGINEERING AND TECHNOLOGY
    No of Titles: 18694
    No of Volumes: 52553
    No of National Journals: 69
    No of Inter-National Journals: 2200
    2
    Programme: MCA
    No of Titles: 3066
    No of Volumes: 10489
    No of National Journals: 14
    No of Inter-National Journals: 33
    " "

    Anti-Ragging Details:

    Name of Committee Member: Smt. Dr. S. S. Chougule
    Committee Type: Anti-Ragging Squad
    Profession: Assistant Professor
    Associated With: Physics, Gcoe, Karad
    Date of Appointment: 03-Jul-14
     
    Name of Committee Member: Dr. V. B. Waghmare
    Committee Type: Anti-Ragging Squad
    Profession: Professor
    Associated With: Eed, Gcoe, Karad
    Date of Appointment: 03-Jul-14
     
    Name of Committee Member: Shri. P. B. Jawade
    Committee Type: Anti-Ragging Squad
    Profession: Assistant Professor
    Associated With: It, Gcoe, Karad
    Date of Appointment: 03-Jul-14
     
    Name of Committee Member: Shri. B. S. Patil
    Committee Type: Anti-Ragging Squad
    Profession: Assistant Professor
    Associated With: Mca, Gcoe,karad
    Date of Appointment: 03-Jul-14
     
    Name of Committee Member: Shri. V. B. Raka
    Committee Type: Anti-Ragging Squad
    Profession: Assistant Professor
    Associated With: Med, Gcoe,karad
    Date of Appointment: 03-Jul-14
     
    Name of Committee Member: Shri. S. K. Patil
    Committee Type: Anti-Ragging Committee
    Profession: Associate Professor
    Associated With: Eed, Gcoe, Karad
    Date of Appointment: 19-Sep-15
     
    Name of Committee Member: Dr. V. B. Waghamare
    Committee Type: Anti-Ragging Committee
    Profession: Professor
    Associated With: Eed, Gcoe,karad
    Date of Appointment: 19-Sep-15
     
    Name of Committee Member: Shri. A. R. Acharya
    Committee Type: Anti-Ragging Committee
    Profession: Associate Professor
    Associated With: Med, Gcoe, Karad
    Date of Appointment: 19-Sep-15
     
    Name of Committee Member: Shri. S. M. Shinde
    Committee Type: Anti-Ragging Committee
    Profession: Assistant Professor
    Associated With: Maths, Gcoe,karad
    Date of Appointment: 19-Sep-15
     
    Name of Committee Member: Shri. B. S. Patil
    Committee Type: Anti-Ragging Committee
    Profession: Assistant Professor
    Associated With: Mca, Gcoe,karad
    Date of Appointment: 19-Sep-15
     
    Name of Committee Member: Smt. S. B. Karadkar
    Committee Type: Anti-Ragging Committee
    Profession: Assistant Professor
    Associated With: Chemistry, Gcoe,karad
    Date of Appointment: 19-Sep-15
     
    Name of Committee Member: Smt. Dr. S. A. Patil
    Committee Type: Anti-Ragging Committee
    Profession: Assistant Professor
    Associated With: Physics, Gcoe,karad
    Date of Appointment: 19-Sep-15
     
    Name of Committee Member: Shri. P. B. Jawade
    Committee Type: Anti-Ragging Committee
    Profession: Assistant Professor
    Associated With: It, Gcoe,karad
    Date of Appointment: 19-Sep-15
     
    Name of Committee Member: Shri. N. V. Sali
    Committee Type: Anti-Ragging Committee
    Profession: Associate Professor
    Associated With: Med, Gcoe,karad
    Date of Appointment: 19-Sep-15
     
    " "
    Student Count
    Sr. No. Course Programme Level Shift First Year Student Count(15-16)
    1 CONSTRUCTION MANAGEMENT ENGINEERING AND TECHNOLOGY POST GRADUATE 1st Shift 12
    2 HEAT POWER ENGINEERING ENGINEERING AND TECHNOLOGY POST GRADUATE 1st Shift 12
    3 POWER SYSTEMS ENGINEERING AND TECHNOLOGY POST GRADUATE 1st Shift 12
    4 PRODUCTION ENGINEERING ENGINEERING AND TECHNOLOGY POST GRADUATE 1st Shift 12
    5 STRUCTURAL ENGINEERING ENGINEERING AND TECHNOLOGY POST GRADUATE 1st Shift 12
    6 CIVIL ENGINEERING ENGINEERING AND TECHNOLOGY UNDER GRADUATE 1st Shift 64
    7 ELECTRICAL ENGINEERING ENGINEERING AND TECHNOLOGY UNDER GRADUATE 1st Shift 61
    8 ELECTRONICS AND TELECOMMUNICATIONS ENGINEERING ENGINEERING AND TECHNOLOGY UNDER GRADUATE 1st Shift 62
    9 INFORMATION TECHNOLOGY ENGINEERING AND TECHNOLOGY UNDER GRADUATE 1st Shift 63
    10 MECHANICAL ENGINEERING ENGINEERING AND TECHNOLOGY UNDER GRADUATE 1st Shift 61
    11 MASTERS IN COMPUTER APPLICATIONS MCA POST GRADUATE 1st Shift 29
Help Your College
  • Encourage employer
    Allow thousands of recruiters to make informed decision to visit your campus.
    Encourage employer
  • Aid admission
    Let admission seekers know your college and its students to like and join.
    Aid admission
Info. update by students of the respective college only.