YITM-Yugantar Institute of Technology and Management

Yugantar Institute Of Technology And Management Isunaided - Private Institute Located At Rajnandgaon Inchhattisgarh . The Address Of The Institute Is G.E. Road, Gram - Thekwa Post-Somni Rajnandgaon-491441 Chhattisgarh ,Rajnandgaon , Pincode491441 . It Operates Under The Parent Organization Yugantar Educational Society . The Institute Started Its First Course In 2007. Yugantar Institute Of Technology And Management Is Open For Both Men And Women. Yugantar Institute Of Technology And Management Is Open For All Sections Of Society. The Head Of The Insititute Is Principal Pradeep Kumar Ghosh , Having A Teaching Experience Of 28 Years And Research Experience Of 23 Years. Contact Details: Website: Www.Yugantarcollege.Com Email: [email protected] Landline No: 7744 - 220781

Course Details:

• CIVIL ENGINEERING

  ENGINEERING AND TECHNOLOGY

  UNDER GRADUATE

  Affiliating Body:	Chhattisgarh Swami Vivekanad Technical Universty, Chhatisgarh	Year Started:	2009
  Shift:	1st Shift	Accreditation Status:	NOT ACCREDITED
  Course Type:	FULL TIME	Course Mode:	Regular
  NRI Approved :	NA	PIO Approved:	NA
  Any Foreign Collaboration :	NA	Name of Foreign University:	-
  Annual Fees (15-16):	?59900	Course Duration:	4 years
  Approved Intake (15-16):	84	Approved Intake (16-17):	84

• COMPUTER SCIENCE & ENGINEERING

  ENGINEERING AND TECHNOLOGY

  UNDER GRADUATE

  Affiliating Body:	Chhattisgarh Swami Vivekanad Technical Universty, Chhatisgarh	Year Started:	2007
  Shift:	1st Shift	Accreditation Status:	NOT ACCREDITED
  Course Type:	FULL TIME	Course Mode:	Regular
  NRI Approved :	NA	PIO Approved:	NA
  Any Foreign Collaboration :	NA	Name of Foreign University:	-
  Annual Fees (15-16):	?59900	Course Duration:	4 years
  Approved Intake (15-16):	42	Approved Intake (16-17):	42

• ELECTRICAL AND ELECTRONICS ENGINEERING

  ENGINEERING AND TECHNOLOGY

  UNDER GRADUATE

  Affiliating Body:	Chhattisgarh Swami Vivekanad Technical Universty, Chhatisgarh	Year Started:	2007
  Shift:	1st Shift	Accreditation Status:	NOT ACCREDITED
  Course Type:	FULL TIME	Course Mode:	Regular
  NRI Approved :	NA	PIO Approved:	NA
  Any Foreign Collaboration :	NA	Name of Foreign University:	-
  Annual Fees (15-16):	?59900	Course Duration:	4 years
  Approved Intake (15-16):	42	Approved Intake (16-17):	42

• MECHANICAL ENGINEERING

  ENGINEERING AND TECHNOLOGY

  UNDER GRADUATE

  Affiliating Body:	Chhattisgarh Swami Vivekanad Technical Universty, Chhatisgarh	Year Started:	2007
  Shift:	1st Shift	Accreditation Status:	NOT ACCREDITED
  Course Type:	FULL TIME	Course Mode:	Regular
  NRI Approved :	NA	PIO Approved:	NA
  Any Foreign Collaboration :	NA	Name of Foreign University:	-
  Annual Fees (15-16):	?59900	Course Duration:	4 years
  Approved Intake (15-16):	84	Approved Intake (16-17):	84

  Lab Details:

  Sr No.	Lab Name	Programme	Course	Level of Course	Major Equipments
  1	ADVANCE LECTRONICS CIRCUIT LAB	ENGINEERING AND TECHNOLOGY	ELECTRONICS & COMMUNICATION ENGG	UNDER GRADUATE	-
  2	ADVANCE MICROPROCESSOR	ENGINEERING AND TECHNOLOGY	ELECTRONICS & COMMUNICATION ENGG	UNDER GRADUATE	-
  3	APP. CHEMISTRY LAB	ENGINEERING AND TECHNOLOGY	FIRST YEAR/OTHER	UNDER GRADUATE	-
  4	APP. PHYSICS LAB	ENGINEERING AND TECHNOLOGY	FIRST YEAR/OTHER	UNDER GRADUATE	-
  5	AUTOMATIC CONTROL SYSTEM	ENGINEERING AND TECHNOLOGY	ELECTRICAL AND ELECTRONICS ENGINEERING	UNDER GRADUATE	-
  6	AUTOMOBILE LAB	ENGINEERING AND TECHNOLOGY	MECHANICAL ENGINEERING	UNDER GRADUATE	-
  7	BASIC CIVIL ENGG. LAB	ENGINEERING AND TECHNOLOGY	FIRST YEAR/OTHER	UNDER GRADUATE	-
  8	BASIC ELECTRICAL ENGG.	ENGINEERING AND TECHNOLOGY	ELECTRICAL AND ELECTRONICS ENGINEERING	UNDER GRADUATE	-
  9	BASIC ELECTRICAL MACHINE	ENGINEERING AND TECHNOLOGY	ELECTRICAL AND ELECTRONICS ENGINEERING	UNDER GRADUATE	RECTIFIER-220v/100A, REGULATED RECTIFIER-60v/50A,
  10	BASIC ELECTRONICS LAB	ENGINEERING AND TECHNOLOGY	ELECTRONICS & COMMUNICATION ENGG	UNDER GRADUATE	-
  11	CAD LAB	ENGINEERING AND TECHNOLOGY	MECHANICAL ENGINEERING	UNDER GRADUATE	PRO-E SOFTWARE
  12	COMMUNICATION SYSTEM I	ENGINEERING AND TECHNOLOGY	ELECTRONICS & COMMUNICATION ENGG	UNDER GRADUATE	-
  13	COMMUNICATION SYSTEM II	ENGINEERING AND TECHNOLOGY	ELECTRONICS & COMMUNICATION ENGG	UNDER GRADUATE	-
  14	COMPUTER GRAPHICS LAB	ENGINEERING AND TECHNOLOGY	COMPUTER SCEINCE & ENGINEERING	UNDER GRADUATE	-
  15	COMPUTER LAB	ENGINEERING AND TECHNOLOGY	COMPUTER SCIENCE AND ENGINEERING	UNDER GRADUATE	-
  16	COMPUTER NETWORK LAB	ENGINEERING AND TECHNOLOGY	COMPUTER SCIENCE AND ENGINEERING	UNDER GRADUATE	-
  17	CONCRETE LAB.	ENGINEERING AND TECHNOLOGY	CIVIL ENGINEERING	UNDER GRADUATE	COMPRESSION TESTING MACHINE, TENSILE STRENGTH TESTER
  18	DATA STRUCTURE LAB	ENGINEERING AND TECHNOLOGY	COMPUTER SCIENCE AND ENGINEERING	UNDER GRADUATE	-
  19	DATABASE MANAGEMENT SYSTEM LAB	ENGINEERING AND TECHNOLOGY	COMPUTER SCIENCE AND ENGINEERING	UNDER GRADUATE	-
  20	DIGITAL LECTRONICS CIRCUIT LAB	ENGINEERING AND TECHNOLOGY	ELECTRONICS & COMMUNICATION ENGG	UNDER GRADUATE	-
  21	DIGITAL SIGNAL PROCESSING LAB	ENGINEERING AND TECHNOLOGY	ELECTRONICS & COMMUNICATION ENGG	UNDER GRADUATE	DSP TRAINNER KIT
  22	DYNAMICS OF MACHINE LAB	ENGINEERING AND TECHNOLOGY	MECHANICAL ENGINEERING	UNDER GRADUATE	UNIVERSAL VIBRATION APPARATUSE
  23	ELECTRICAL CIRCUIT	ENGINEERING AND TECHNOLOGY	ELECTRICAL AND ELECTRONICS ENGINEERING	UNDER GRADUATE	-
  24	ELECTRICAL MEASUREMENT & MEASURING INSTRUMENT	ENGINEERING AND TECHNOLOGY	ELECTRICAL AND ELECTRONICS ENGINEERING	UNDER GRADUATE	-
  25	ENERGY CONVERSION SYSTEM LAB	ENGINEERING AND TECHNOLOGY	MECHANICAL ENGINEERING	UNDER GRADUATE	TWO-STAGE TWO CYLINDER RADIAL FLOW AIR COMPRESSOR
  26	ENGG. GEOLOGY LAB	ENGINEERING AND TECHNOLOGY	CIVIL ENGINEERING	UNDER GRADUATE	-
  27	ENGG. MECHANICS LAB	ENGINEERING AND TECHNOLOGY	MECHANICAL ENGINEERING	UNDER GRADUATE	-
  28	ENVIORNMENTAL LAB	ENGINEERING AND TECHNOLOGY	CIVIL ENGINEERING	UNDER GRADUATE	-
  29	FLUID MACHINERY LAB	ENGINEERING AND TECHNOLOGY	MECHANICAL ENGINEERING	UNDER GRADUATE	1. PELTON TURBINE TEST RIG CLOSED CIRCUIT 2. FRANCIS TURBINE TEST RIG CLOSED CIRCUIT
  30	FLUID MECHANICS	ENGINEERING AND TECHNOLOGY	MECHANICAL ENGINEERING	UNDER GRADUATE	1. CLOSED CIRCUIT COMBINED CALIBRATION RIG FOR VENTURIMETER
  31	GEOTECH LAB	ENGINEERING AND TECHNOLOGY	CIVIL ENGINEERING	UNDER GRADUATE	AUTOMATIC COMPACTION APPARATUS, DIRECT SHEAR APPARATUS, UNCONFINED COMPRESSION TESTER, C.B.R.
  32	HEAT & MASS TRANSFER LAB	ENGINEERING AND TECHNOLOGY	MECHANICAL ENGINEERING	UNDER GRADUATE	-
  33	HIGH VOLTAGE ENGINNEING	ENGINEERING AND TECHNOLOGY	ELECTRICAL AND ELECTRONICS ENGINEERING	UNDER GRADUATE	AC/DC TEST SET CONTROL PANEL, 15 MM SPHERE GAP ASSEMBLY
  34	INDUSTRIAL & POWER ELECTRONICS	ENGINEERING AND TECHNOLOGY	ELECTRICAL AND ELECTRONICS ENGINEERING	UNDER GRADUATE	-
  35	INDUSTRIAL TRANSDUCERS & SENSORS LAB	ENGINEERING AND TECHNOLOGY	ELECTRONICS & COMMUNICATION ENGG	UNDER GRADUATE	-
  36	INTERNAL COMBUSTION ENGINES LAB	ENGINEERING AND TECHNOLOGY	MECHANICAL ENGINEERING	UNDER GRADUATE	1. SINGLE CYLINDER STROKE WATER COOLED 2. DIESEL ENGINE FOUR CYLINDER FOUR STROKE
  37	KINEMATICS OF MACHINE LAB	ENGINEERING AND TECHNOLOGY	MECHANICAL ENGINEERING	UNDER GRADUATE	-
  38	LECTRONICS WORKSHOP	ENGINEERING AND TECHNOLOGY	ELECTRONICS & COMMUNICATION ENGG	UNDER GRADUATE	-
  39	LINEAR INTEGRETED CIRCUIT & APPLICATION	ENGINEERING AND TECHNOLOGY	ELECTRONICS & COMMUNICATION ENGG	UNDER GRADUATE	-
  40	MATERIAL TESTING LAB	ENGINEERING AND TECHNOLOGY	MECHANICAL ENGINEERING	UNDER GRADUATE	1. UNIVERSAL TESTING MACHINE 2. IMPECT TESTING MACHINE 3. FATIGUE TESTING MACHINE 4. SPRING TEST
  41	MECHANICAL MEASURMENT AND METROLOGY LAB	ENGINEERING AND TECHNOLOGY	MECHANICAL ENGINEERING	UNDER GRADUATE	-
  42	MICRO CONTROLLER	ENGINEERING AND TECHNOLOGY	ELECTRONICS & COMMUNICATION ENGG	UNDER GRADUATE	8051 KIT WITH P.C. INTERFACE
  43	MICRO PROSECER LAB	ENGINEERING AND TECHNOLOGY	ELECTRONICS & COMMUNICATION ENGG	UNDER GRADUATE	-
  44	MICROWAVE COMMUNICATION	ENGINEERING AND TECHNOLOGY	ELECTRONICS & COMMUNICATION ENGG	UNDER GRADUATE	MICROWAVE TEST BENCH
  45	OBJECT ORIENTED CONCEPT (C++)	ENGINEERING AND TECHNOLOGY	COMPUTER SCIENCE & ENGINEERING	UNDER GRADUATE	-
  46	OPTICAL FIBER COMMUNICATION LAB	ENGINEERING AND TECHNOLOGY	ELECTRONICS & COMMUNICATION ENGG	UNDER GRADUATE	FIBER OPTICAL KIT
  47	POWER SYSTEM PROTECTION & SWITCHGEAR	ENGINEERING AND TECHNOLOGY	ELECTRICAL AND ELECTRONICS ENGINEERING	UNDER GRADUATE	UNDER VOLTAGE RELAY (IDMT), OVER VOLTAGE RELAY (IDMT), OVER CURRENT RELAY (IDMT),
  48	PRINCIPLES OF COMMUNICATION LAB	ENGINEERING AND TECHNOLOGY	COMPUTER SCIENCE & ENGINEERING	UNDER GRADUATE	-
  49	PROGRAMMING WITH C LAB	ENGINEERING AND TECHNOLOGY	COMPUTER SCIENCE & ENGINEERING	UNDER GRADUATE	-
  50	REFRIGERATION & AIR CONDITIONING LAB	ENGINEERING AND TECHNOLOGY	MECHANICAL ENGINEERING	UNDER GRADUATE	1ME.HEAT PUMP T.RIG 2AIR &WATER PUMP T.RIG 3A.C.T.RIG 4SIMP.ABS.SYS 5COOLING TOWER 6REF.TUTOR
  51	ROTATING ELECTRICAL MACHINE	ENGINEERING AND TECHNOLOGY	ELECTRICAL AND ELECTRONICS ENGINEERING	UNDER GRADUATE	-
  52	ROTATING ELECTRICAL MACHINES	ENGINEERING AND TECHNOLOGY	ELECTRICAL AND ELECTRONICS ENGINEERING	UNDER GRADUATE	SYNCHRONOUS GENERATOR
  53	SURVEYING LAB.	ENGINEERING AND TECHNOLOGY	CIVIL ENGINEERING	UNDER GRADUATE	-
  54	THERMODYNAMICS LAB	ENGINEERING AND TECHNOLOGY	MECHANICAL ENGINEERING	UNDER GRADUATE	-
  55	TRANSPORATATION LAB	ENGINEERING AND TECHNOLOGY	CIVIL ENGINEERING	UNDER GRADUATE	DUTILITY TESTING MACHINE, LOS ANGELES ABRATION MACHINE,MARSHALL TESTING MACHINE
  56	UTILIZATION OF ELECTRICAL ENERGY	ENGINEERING AND TECHNOLOGY	ELECTRICAL AND ELECTRONICS ENGINEERING	UNDER GRADUATE	AC MOTOR SPEED CONTROL TRAINER,DC MOTOR SPEED CONTROL TRAINER
  57	WORK SHOP / MFG. LAB	ENGINEERING AND TECHNOLOGY	MECHANICAL ENGINEERING	UNDER GRADUATE	1. LATHE MACHINE 2. MILLING MACHINE 3. SHAPER MACHINE 4. CAPSTON MACHINE 5. RADIAL DRILL MACHINE

  Library Facilities:

  Reading Hall Capacity:	150
  Library Network:	YES
  No of Multimedia PCs:	Y
  Reprographic Availability:	Y
  Working Hours:	9:30 to 16:00

  Library Books:

  Sr No.	Book Details
  1	Programme: ENGINEERING AND TECHNOLOGY No of Titles: 2529 No of Volumes: 17372 No of National Journals: 34 No of Inter-National Journals: 0

  " "

  Anti-Ragging Details:

  Name of Committee Member:	ABHISHEK GADRE
  Committee Type:	Anti-Ragging Squad
  Profession:	Teaching
  Associated With:	Mechanical
  Date of Appointment:	25-Jul-15
  Name of Committee Member:	TARUN DEWANGAN
  Committee Type:	Anti-Ragging Committee
  Profession:	Teaching
  Associated With:	Ece
  Date of Appointment:	18-Jul-12
  Name of Committee Member:	NEELAM SWARNKAR
  Committee Type:	Anti-Ragging Committee
  Profession:	Teaching
  Associated With:	Cse
  Date of Appointment:	18-Jul-12
  Name of Committee Member:	DR.P.K.GHOSH
  Committee Type:	Anti-Ragging Committee
  Profession:	Principal
  Associated With:	Civil
  Date of Appointment:	18-Jul-12
  Name of Committee Member:	RAJESH CHOPDA
  Committee Type:	Anti-Ragging Committee
  Profession:	Teaching
  Associated With:	Physics
  Date of Appointment:	18-Jul-12
  Name of Committee Member:	GARIMA SHRIVASTAVA
  Committee Type:	Anti-Ragging Committee
  Profession:	Teaching
  Associated With:	Eee
  Date of Appointment:	18-Jul-12
  Name of Committee Member:	TARUN DEWANGAN
  Committee Type:	Anti-Ragging Committee
  Profession:	Teaching
  Associated With:	Ece
  Date of Appointment:	18-Jul-12
  Name of Committee Member:	NEELAM SWARNAKAR
  Committee Type:	Anti-Ragging Committee
  Profession:	Teaching
  Associated With:	Cse
  Date of Appointment:	18-Jul-12
  Name of Committee Member:	RAJENDRA VYAS
  Committee Type:	Anti-Ragging Committee
  Profession:	Journalist
  Associated With:	Amrit Sandesh
  Date of Appointment:	18-Jul-12
  Name of Committee Member:	M.K.SHRIVASTAVA
  Committee Type:	Anti-Ragging Committee
  Profession:	Adminidtrator
  Associated With:	Office
  Date of Appointment:	25-Jul-15

  " "

  Student Count

  Sr. No.	Course	Programme	Level	Shift	First Year Student Count(15-16)
  1	CIVIL ENGINEERING	ENGINEERING AND TECHNOLOGY	UNDER GRADUATE	1st Shift	12
  2	COMPUTER SCIENCE & ENGINEERING	ENGINEERING AND TECHNOLOGY	UNDER GRADUATE	1st Shift	14
  3	ELECTRICAL AND ELECTRONICS ENGINEERING	ENGINEERING AND TECHNOLOGY	UNDER GRADUATE	1st Shift	7
  4	MECHANICAL ENGINEERING	ENGINEERING AND TECHNOLOGY	UNDER GRADUATE	1st Shift	9